Impreza RS Coupe AWD F4-2.5L SOHC (1999)
4. Measure distance "A" between left and right marks. Toe-in can then be obtained by the following equation: B - A = Toe-in
^
Adjustment
1. Loosen self-locking nut on inner side of rear lateral link.
CAUTION:
^
When loosening or tightening adjusting bolt, hold bolt head and turn self-locking nut.
^
Discard loosened self-locking nut and replace with a new one.
2. Turn adjusting bolt head until toe-in is at the specification.
NOTE: When left and right wheels are adjusted for toe-in at the same time, the movement of one scale graduation changes toe-in by
approximately 3 mm (0.12 inch).
3. Tighten self-locking nut.
Tightening torque: 98 ± 15 Nm (10 ± 1.5 kg-m, 72 ± 11 ft. lbs.)
Thrust Angle
^
Inspection
1. Position vehicle on a level surface.
2. Move vehicle 3 to 4 meters directly forward.
3. Determine locus of both front and rear axles.
