Impreza RS Coupe AWD F4-2.5L SOHC (1999)
Measure resistance across test harness I connector (3I) terminal and chassis ground.
CHECK: Is the resistance more than 10 K Ohms?
YES:
Replace airbag control module.
NO:
Go to step 5K4.
5K4: AIRBAG MAIN HARNESS INSPECTION
1. Disconnect connector (AB14) and (AB15), then connect test harness F connector (2F) and connector (AB14).
2. Measure resistance between test harness I connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5K5.
NO:
Replace airbag main harness.
5K5: AIRBAG MAIN HARNESS INSPECTION
Measure resistance between test harness I connector (3I) terminal and test harness F connector (3F) terminal.
CHECK: Is the resistance less than 10 Ohms?
YES:
Go to step 5K6.
NO:
Replace airbag main harness.
5K6: AIRBAG MAIN HARNESS INSPECTION