Impreza RS Coupe AWD F4-2.5L SOHC (1999)
Measure resistance between test harness F connector (3F) terminal and test harness H connector (3H) terminal.
CHECK: Is the resistance less than 10 K Ohms?
YES:
Go to step 5K10.
NO:
Replace front sub sensor harness (RH).
5K10: FRONT SUB SENSOR HARNESS (RH) INSPECTION
Measure resistance across test harness F connector (3F) terminal and chassis ground.
CHECK: Is the resistance more than 10 Ohms?
YES:
Go to step 5K11.
NO:
Replace front sub sensor harness (RH).
5K11: FRONT SUB SENSOR HARNESS (RH) INSPECTION
Measure resistance across test harness F connector (3F) terminal and chassis ground.
CHECK: Is the resistance more than 10 k Ohms?
YES:
Go to step 5K12.
NO:
Replace front sub sensor harness (RH).
5K12: FRONT SUB SENSOR (RH) INSPECTION
1. Connect test harness H connector (2H) and front sub sensor (RH).
