Impreza WRX F4-2.0L DOHC Turbo (2004)
Trim Panel: Service and Repair
Upper Inner Trim
UPPER INNER TRIM
REMOVAL
1. Remove the lower inner trim.
2. Remove the front mole (A).
3. Remove the front pillar upper trim (B).
4. Detach the front seat belt shoulder anchor, then remove the center pillar upper trim (C).
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be sure to securely hook pawls of inner trim panel to body flange.
NOTE: When installing the center pillar upper trim and front pillar upper trim, be sure to set the front mole as shown in figure.