Impreza WRX F4-2.0L DOHC Turbo (2004)
7) Tighten the nuts which install front cushion rubber onto front crossmember.
Tightening torque: 69 Nm (7.0 kgf-m, 50.9 ft. lbs.)
8) Install the front and center exhaust pipe. (Nonturbo model)
NOTE: Use a new gasket.
9) Install the under cover.
10) Lower the vehicle.
CAUTION: When lowering the vehicle, lower the lifting device and wire ropes together.
11) Remove the lifting device and wire ropes.
12) Install the pitching stopper.
Tightening torque:
T1: 50 Nm (5.1 kgf-m, 36.9 ft. lbs.)
T2: 58 Nm (5.9 kgf-m, 42.8 ft. lbs.)