subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service and Repair|Page 4857 > < Diagram Information and Instructions|Page 4852
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

CAUTION:

-

When servicing a vehicle, be sure to turn the ignition switch OFF, disconnect the ground terminal from battery, and wait for more than 20 seconds
before starting work.

-

The airbag system is fitted with a backup power source. If the airbag system is serviced within 20 seconds after the ground terminal is
disconnected, it may inflate.

-

If the sensors, airbag module, airbag control module, pretensioner and harness are deformed or damaged, replace them with new genuine parts.

-

Do not use the airbag or pretensioner parts from other vehicles. Always replace the defective parts with new parts.

-

Never re-use a deployed airbag or pretensioner.

-

When checking the system, be sure to use a digital circuit tester.
Use of an analog circuit tester may cause the air-bag to activate erroneously.

Air Bag(s) Arming and Disarming|Service and Repair|Page 4857 > < Diagram Information and Instructions|Page 4852