subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Headlamp Relay > < Headlamp Bulb|Testing and Inspection
Page 1
background image

Headlamp Bulb: Service and Repair

Headlight Bulb 

REMOVAL

CAUTION:

-

Because the tungsten halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb's service life. Hold the flange
portion when replacing the bulb. Never touch the glass portion.

-

Do not leave the headlight without a bulb for a long time. Dust, moisture, etc. entering the headlight may affect its the performance.

1. Disconnect the ground terminal from battery.

2. Remove the duct (A) (when right side headlight is removed).
3. Disconnect the harness connector.

4. Remove the cap (A).

5. Remove the headlight bulb (A).

INSTALLATION

Install in the reverse order of removal.

Headlamp Relay > < Headlamp Bulb|Testing and Inspection