Impreza WRX F4-2.0L DOHC Turbo (2004)
specification.
8) Operate the hydraulic control unit in the sequence control mode. (With ABS)
9) Recheck the brake stroke.
10) If the distance is more than specified, there is a possibility air is in the inside of the hydraulic unit. Repeat above steps 2) to 9) until pedal
stroke meets the specification.
11) Add brake fluid to the required level (MAX. level) of reservoir tank.
12) As a final step, test run the vehicle at low speed and apply brakes relatively hard 2 to 3 times to ensure that brakes provide normal braking
action on all four wheels without dragging and uneven braking.