Impreza WRX F4-2.0L DOHC Turbo (2004)
Transmission Temperature Sensor/Switch: Service and Repair
Shift Solenoids, Duty Solenoids and ATF Temperature Sensor
REMOVAL
SHIFT SOLENOIDS AND DUTY SOLENOIDS
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Clean the transmission exterior.
5) Drain the ATF completely.
NOTE: Tighten the ATF drain plug after draining the ATF.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
6) Remove the oil pan.
7) Disconnect each solenoid connectors. Remove the connectors from clip and disconnect the connectors.
