subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Mechanical Specifications|Page 1728 > < Mechanical Specifications
Page 1
background image

Compression Check: Pressure, Vacuum and Temperature Specifications

Compression Inspection

Wide Open Throttle (350 rpm)

Standard pressure................................................................................................................................... 981-1,177 kPa (10-12 kgf/cm2, 142-171 psi)
Limit pressure ............................................................................................................................................................  882 kPa (9.0 kgf/cm2, 121 psi)
Difference between cylinders ..........................................................................................................................................  49 kPa (0.5 kgf/cm2, 7 psi)

Note: Perform at least two measurements per cylinder, and make sure that the values are correct.

Mechanical Specifications|Page 1728 > < Mechanical Specifications