Impreza WRX F4-2.0L DOHC Turbo (2004)
5) Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket: Three Bond 1217B(Part No. K0877YA020)
6) Apply a plenty amount of liquid gasket to three holes other than screw holes on transmission case.
Liquid gasket: Three Bond 1217B (Part No. K0877YA020)
7) Install the oil pan.
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
8) Pour ATF into the oil charge pipe.
9) Check the level of ATF.
DISASSEMBLY
1) Remove oil strainer from lower control valve body.
NOTE: Arrange the removed bolts in good order to assemble in the same place as disassembly, because the bolts length are different.
