Impreza WRX F4-2.0L DOHC Turbo (2004)
6) Place alignment mark on free ring and trunnion.
7) Remove the free ring from trunnion.
CAUTION: Be careful with the free ring position.
8) Place alignment mark on trunnion and shaft.
9) Remove the snap ring and trunnion.
CAUTION: Be sure to wrap shaft splines with vinyl tape to prevent boot from scratches.
10) Remove the SFJ boot.
11) Place the drive shaft in a vise between wooden blocks.
CAUTION: Do not place drive shaft directly in the vise; use wooden block.
