Impreza WRX F4-2.0L DOHC Turbo (2004)
5) Insert the spring pin.
6) Mount the cushion rubber on the body.
Tightening torque: 18 Nm {1.8 kgf-m. 13.0 ft. lbs.)
7) Connect the rod to the joint.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
8) Connect the stay to transmission bracket.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
9) Install the heat shield cover. (If equipped)
10) Install the rear exhaust pipe and muffler.