Impreza WRX F4-2.0L DOHC Turbo (2004)
Transmission Position Switch/Sensor: Service and Repair
AT Shift Lock Solenoid and "P" Position Switch
REMOVAL
1) Disconnect the ground terminal from battery.
2) Remove the console box.
3) Disconnect the connector.
4) Remove the grip.
5) Remove the indicator cover.
6) Remove the slider.
7) Remove the cushion.
8) Remove the clip and remove the "P" position switch.
9) Remove the clamp and remove the shift lock solenoid.
INSTALLATION
Install in the reverse order of removal.
