Impreza WRX F4-2.0L DOHC Turbo (2004)
14) Place the transmission jack under crossmember.
NOTE: Place a cloth or other cushioning material between the crossmember and transmission.
15) Remove the transmission rear crossmember bolts.
16) Lower the AT jack.
NOTE: Do not separate the AT jack and transmission.
17) Remove the oil cooler outlet pipe.
CAUTION: When removing the outlet pipe, be careful not to lose balls and springs used with retaining screws.
18) Remove front and rear vehicle speed sensors and the torque converter turbine speed sensor.
^
Front vehicle speed sensor and torque converter turbine speed sensor
^
Rear vehicle speed sensor
19) Remove the oil pan.
