Impreza WRX F4-2.0L DOHC Turbo (2004)
5. For adjustment of upper and lower ends of center pillar, loosen the adjusting nut (A) of B-channel (B).
6. Adjust so that the upper and lower ends of center pillar are the same size.
7. For glass stroke adjustment, close door, raise glass until positional relationship between glass and weatherstrip becomes as shown. And secure the
glass so that the upper stopper lightly touches the glass holder.
For preventing wind noise, adjust the glass at the position where tip of gusset is raised up a little.
8. After stabilizer adjustment, carry out glass crimp adjustment. First, visually ensure positional relationship between retainer & molding and glass of
the roof side, and then begin with rear sash adjustment. Adjust two adjusting bolts alternately step by step to obtain dimensions shown above
(cross-section A).
NOTE: If two nuts are loosened at the same time, the sash moves back and forth. Therefore, when one nut is adjusted, secure the other.
