Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Power Door Lock Actuator: Service and Repair
Rear Door Latch and Door Lock Actuator Assembly
REAR DOOR LATCH AND DOOR LOCK ACTUATOR ASSEMBLY
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the rear door trim.
3. Remove the sealing cover.
4. Remove the rear inner remote.
5. Remove three screws and a bolt.
6. Disconnect the connector, and then remove the rear door latch assembly.
INSTALLATION
Install in the reverse order of removal.
NOTE: Make sure the lock works properly after installation.
