Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Parking Brake Shoe: Service and Repair
Parking Brake Assembly (Rear Disc Brake)
REMOVAL
1) Pull down and release the parking brake.
2) Remove the two mounting bolts and remove the brake caliper assembly.
3) Suspend the brake caliper assembly so that the hose is not stretched.
4) Remove the disc rotor.
NOTE:
If the disc rotor is difficult to remove, try the two following methods in order.
(1)
Turn the adjusting screw using a flat tip screwdriver until brake shoe gets away enough from the disc rotor.
(2)
If the disc rotor seizes up within hub, drive the disc rotor out by installing two 8-mm bolts in holes B on rotor.
5) Remove the shoe return spring from parking brake assembly.