Impreza WRX STI F4-2.5L DOHC Turbo (2007)
INSTALLATION
FRONT SIDE BELT
CAUTION: Wipe off any oil or water on the belt and pulley.
1) Install the front side belt (C), and tighten the slider bolt so as to obtain the specified belt tension.
2) Tighten the lock bolt (A).
3) Tighten the slider bolt (B).
4) Install the V-belt cover.
Tightening torque:
Bolt 13.7 Nm (1.4 kgf-m, 10.1 ft-lb)
Nut 4 Nm (0.4 kgf-m, 2.95 ft-lb)
REAR SIDE BELT
1) Install the belt tensioner.
2) Install the rear side belt, and tighten the slider bolt (B) so as to obtain the specified belt tension.
3) Tighten the lock nut (A).
4) Install the front side belt.