Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Condenser HVAC: Service and Repair
Condenser
REMOVAL
1. Using the refrigerant recovery system, discharge refrigerant.
2. Disconnect the ground cable from battery.
3. Remove the front bumper.
4. Disconnect the pressure hose and pipe from condenser.
5. Remove the radiator bracket (A).
6. Remove the two bolts. While lifting the condenser, pull it out through the space between radiator and radiator panel.
CAUTION:
-
Be careful not to damage the condenser fins. If a damaged fin is found, repair it using a thin screwdriver.
-
If the condenser is replaced, add appropriate amount of compressor oil to the compressor.
INSTALLATION
1. Install in the reverse order of removal.
