Impreza WRX STI F4-2.5L DOHC Turbo (2007)
15. Move the clip, and disconnect the evaporation hose (B).
16. Remove the fuel filler pipe to the underside of vehicle.
17. Remove the air vent pipe together with clip from the body.
INSTALLATION
1. Open the fuel filler flap lid.
2. Set the fuel saucer (A) with rubber packing (C), and then insert the fuel filler pipe into the hole from the inside of apron.
3. Align the holes in fuel filler pipe neck and set the cup (B), and tighten the screws.
NOTE: If the edges of rubber packing are folded toward the inside, straighten them with a flat-tip screwdriver