subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < Diagram Information and Instructions|Page 1543
Page 1
background image

Ignition Control Module: Service and Repair

Ignition Coil and Ignitor Assembly

REMOVAL

Direct ignition type has been adopted. Refer to the "Spark Plug Removal" for removal procedure.

INSTALLATION

Install in the reverse order of removal.

Tightening torque:  16 N.m (1.6 kgf-m, 11.7 ft-lb)

Sensors and Switches - Powertrain Management > < Diagram Information and Instructions|Page 1543