Impreza WRX STI F4-2.5L DOHC Turbo (2007)
1. Remove the shoulder anchor bolt, and then detach the shoulder anchor from quarter pillar.
2. Remove the quarter trim.
3. Remove the three bolts, and then detach the seat belt assembly.
6. CENTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (WAGON MODEL)
1. Remove the rear seat cushion.
2. Remove the bolt, and then detach the center seat belt assembly.
INSTALLATION
1. OUTER SEAT BELT RH ASSEMBLY AND LH ASSEMBLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
-
During installation, make sure that the seat belts are not twisted.
-
After installation, make sure that the seat belts can be smoothly extended and wound.
2. SHOULDER SEAT BELT CTR ASSEMBLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
-
During installation, make sure that the seat belts are not twisted.
-
After installation, make sure that the seat belts can be smoothly extended and wound.
3. CENTER SEAT BELT LH ASSEMBLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION: During installation, make sure that the seat belts are not twisted.
