Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Impact Sensor: Service and Repair
Impact Sensor
IMPACT SENSOR
REMOVAL
1. Remove the key from ignition switch.
2. Close all the doors, trunk lid and rear gate.
3. Press the UNLOCK button of transmitter.
4. Change the setting of impact sensor using Subaru Select Monitor.
5. Disconnect the ground cable from battery.
6. Remove the impact sensor.
INSTALLATION
1. Remove the key from ignition switch.
2. Close all the doors, trunk lid and rear gate.
3. Press the UNLOCK button of transmitter.
4. Disconnect the ground cable from battery.
5. Install the impact sensor.
6. Connect the battery ground cable to battery.
7. Change the setting of impact sensor using Subaru Select Monitor.
