Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Impact Sensor: Description and Operation
IMPACT SENSOR
OPERATION
1. IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
1. Connect the Subaru Select Monitor to data link connector.
2. Turn the ignition switch to ON.
3. Select {Keyless Unit} from the main menu.
4. Select {ECU customizing}.
5. Make a impact monitor setting.
-
When installing: ON
-
When removing: OFF
6. Make a impact monitor ON/OFF setting.
-
When installing: ON
-
When removing: OFF
7. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.
