Impreza WRX STI F4-2.5L DOHC Turbo (2007)
Impact Sensor: Service and Repair
Side Airbag Sensor
SIDE AIRBAG SENSOR
REMOVAL
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery, and wait for at least 20 seconds before starting work.
3. Remove the outer seat belt (FRONT).
4. Detach the side airbag sensor, and then disconnect the airbag connector.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: Refer to "COMPONENT" in "General Description". See: Restraint Systems/Air Bag Systems/Locations