Impreza WRX STI F4-2.5L DOHC Turbo (2007)
If there is continuity in one direction and the continuity in the other or if there is continuity at unequal points, adjust the inhibitor switch.
4. Repeat the above checks. If there are abnormalities, adjust the select cable.
REMOVAL
1. Set up the vehicle on a lift.
2. Move the select lever to N range.
3. Remove the air intake chamber. (Non-turbo model)
4. Remove the intercooler. (Turbo model)
5. Disconnect the inhibitor switch connector.
6. Remove the inhibitor switch connector from stay.
7. Lift-up the vehicle.
8. Remove the front and center exhaust pipes.
9. Remove the snap pin and washer from range select lever.
