Impreza WRX STI F4-2.5L Turbo (2008)
CAUTION:
-
Without the carrier plate lowered to the bottom most position, do not lower the glass by itself to the lowest position within the door
panel.
-
The glass may come off of the sash, and become damaged.
5. Lower the glass slowly to the bottom most position in the door panel.
6. Remove the bolts and nuts, and then remove the sash. (Detach starting from the upper holding points.)
7. Remove the glass run rubber.
8. Remove the door glass while tilting the glass.
CAUTION: Avoid impact and damage to the glass.
INSTALLATION
Install in the reverse order of removal.
CAUTION: Make sure that the glass run rubber is placed securely onto the door flame and sash.
Tightening torque:
Refer to "COMPONENT" of "General Description".
<Ref. to REAR DOOR GLASS, COMPONENT, General Description.>
