subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Body - Fuel Door Not Flush With Body|Page 3986 > < Body - Fuel Door Not Flush With Body
Page 2
background image

5)

Remove the 3 screws that secure the fuel filler ring and gasket (see figure 3).

6)

Apply white grease to the fuel filler ring (see figure 4).

7)

Reinstall fuel filler ring and gasket.

8)

Reinstall fuel cap.

9)

Check fuel door to body fit, if not within specification proceed to the next step.

10)

Measure the fuel door tongue height (initial spec 42mm). If out of spec, carefully bend the tongue to obtain a 43mm height (see figure 5).

11)

Reconnect negative battery cable.

12)

Reset radio presets and set clock.

Warranty Information

For vehicles within the Basic New Car Limited Warranty period, this repair can be claimed using the table.

Body - Fuel Door Not Flush With Body|Page 3986 > < Body - Fuel Door Not Flush With Body