Impreza WRX STI F4-2.5L Turbo (2008)
^
Modeling clay (available at most stationary stores)
^
Ink stamp pad (available at most stationary stores)
^
Permatex(TM) Medium Strength Threadlocker BLUE
Warranty/Claim Information
Repair Information
Repair Information
The following steps need to be performed:
^
Check rear door to rear quarter panel surface height difference. If out of specification, adjust door.
^
Inspect paint, repair as necessary following the procedure listed in the introduction of this bulletin.
^
Install protective film.
Check the surface height difference between the rear door and rear quarter panel. The surface height difference should be measured at three points.