Impreza WRX STI F4-2.5L Turbo (2008)
Trunk / Liftgate Switch: Service and Repair
Rear Gate Opener Button
REMOVAL
1. Remove the rear gate trim.
2. Remove the rear gate garnish.
3. Disconnect the harness connector of the rear gate opener button.
4. Hold down the hook of the rear gate opener button, and remove the rear gate opener button.
INSTALLATION
CAUTION: Make sure the harness grommet is securely installed.
If not properly installed, this may can cause leaks.
Install in the reverse order of removal.
NOTE: Make sure that the rear gate latch assembly works properly after installation.