Impreza WRX STI F4-2.5L Turbo (2008)
3) Remove mud and foreign matter from the caliper body assembly.
CAUTION: Be careful not to allow foreign matter to enter the brake hose connector.
INSTALLATION
1) Install the caliper body to the housing.
Tightening torque: 65 Nm (6.6 kgf-m, 47.9 ft. lbs.)
2) Apply a thin coat of Molykote AS880N (Part No. K0777YA010) or the pad kit grease to both surfaces of the pad side and pad inner shim.
3) Install the pads to the caliper body.
4) Install the cross spring and pad pins.
5) Install the clips.
6) Connect the brake hose using a new brake hose gasket.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
7) Bleed air from the brake system.
