Impreza WRX STI F4-2.5L Turbo (2008)
Parking Brake Shoe: Service and Repair
Parking Brake Assembly (Rear Disc Brake)
REMOVAL
1) Release the parking brake.
2) Lift up the vehicle, and then remove the rear wheels.
3) Remove the brake hose bracket.
4) Remove the two mounting bolts and remove the rear disc brake caliper.
5) Suspend the rear disc brake caliper so that the brake hose is not stretched.
6) Remove the rear disc brake rotor.
NOTE: If the disc rotor is difficult to remove, try the following two methods in order.
1) Turn the adjusting screw using a flat tip screwdriver until the brake shoe moves adequately away from the disc rotor.
2) If disc rotor is seized on the hub, drive the disc rotor out by pushing two 8 mm bolts in holes B on the rotor.
