Impreza WRX STI F4-2.5L Turbo (2008)
2) Install the hose to water pump.
3) Install the tensioner bracket.
Tightening torque: 24.5 Nm (2.5 kgf-m, 18.1 ft. lbs.)
4) Install the belt cover No. 2 LH.
Tightening torque: 5 Nm (0.5 kgf-m, 3.7 ft. lbs.)
5) Install the cam sprocket LH.
6) Install the belt idler No. 2 (C).
Tightening torque: 39 Nm (4.0 kgf-m, 28.8 ft. lbs.)
7) Install the belt idler (B).
Tightening torque: 25 Nm (2.5 kgf-m, 18.4 ft. lbs.)
8) Install an automatic belt tension adjuster (A) with the tension rod held by a pin.
