Impreza WRX STI F4-2.5L Turbo (2008)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
In-Vehicle Sensor (Auto A/C Model)
In-vehicle Sensor (Auto A/C Model)
REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the instrument panel lower.
3. Disconnect the connector and aspirator hose, remove the screw and remove the in-vehicle sensor from the instrument panel.
CAUTION: Be careful not to damage the sensors and interior trims when removing.
INSTALLATION
Install in the reverse order of removal.
