Impreza WRX STI F4-2.5L Turbo (2008)
12. Loosen the clamp, and disconnect the fuel filler hose (A) and evaporation hose (B).
13. Remove the fuel filler pipe to the underside of the vehicle.
INSTALLATION
1. Open the fuel filler lid.
2. Set the fuel saucer (A) with rubber seal (C), and insert the fuel filler pipe into hole from the inner side of apron.
3. Align the holes in fuel filler pipe neck and set the cup (B), and tighten the screws.
NOTE: If the edges of rubber seal are folded toward inside, straighten it with a flat tip screwdriver.