Impreza WRX STI F4-2.5L Turbo (2008)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor
REMOVAL
1. INTAKE SIDE
-
Camshaft position sensor RH
1. Disconnect the ground cable from the battery.
2. Disconnect the connector from camshaft position sensor RH.
3. Remove the camshaft position sensor RH from the rear side of the cylinder head.
-
Camshaft position sensor LH
1. Disconnect the ground cable from the battery.
2. Remove the intake manifold.
3. Remove the camshaft position sensor LH from the rear side of the cylinder head.
2. EXHAUST SIDE
