Impreza WRX STI F4-2.5L Turbo (2008)
Air Bag: Service and Repair
Curtain Airbag Module
Curtain Airbag Module
REMOVAL
CAUTION: Refer to "CAUTION" of "General Description" before handling the airbag module.
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the rear quarter trim.
4. Disconnect the curtain airbag module connector.
5. Remove the roof trim.
6. Remove the airbag guide from the front pillar.
7. Remove the bolts and them remove the curtain airbag module.
CAUTION:
-
Be careful not to damage the curtain airbag module during removal.
-
Never open the curtain airbag module before deploying it. Never reuse the deployed curtain airbag module.
INSTALLATION
CAUTION:
-
Refer to "CAUTION" of "General Description" before handling the airbag module.
-
When installing the curtain airbag module, install a specified part at specified place.
-
Be careful not to damage the curtain airbag module during removal.
-
Never open the curtain airbag module before deploying it. Never reuse the deployed curtain airbag module.
-
Make sure that there are no foreign matter on airbag module.
