Impreza WRX STI F4-2.5L Turbo (2008)
Seat Belt: Service and Repair
Rear Seat Belt
Rear Seat Belt
REMOVAL
1. OUTER SEAT BELT ASSEMBLY RH & LH
1. Remove the luggage floor mat.
2. Remove the rear seat cushion.
3. Remove the seat belt lower anchor bolt.
4. Remove the rear quarter trim.
5. Remove the nuts, then remove the outer belt assembly.
CAUTION: Do not remove the bolt and nut securing the retractor and bracket.
2. SHOULDER SEAT BELT CENTER ASSEMBLY
1. Remove the shoulder anchor bolt cover (A).
2. Remove the shoulder anchor bolt (B), and then remove shoulder anchor from the quarter pillar.
