Impreza WRX STI F4-2.5L Turbo (2008)
3) Insert bolts through the clamp to temporarily tighten the gearbox to the crossmember bracket.
4) Tighten the bolts temporarily holding the gearbox clamp and bracket together to the specified torque.
Tightening torque: 60 N-m (6.1 kgf-m, 44.1 ft-lb)
5) Connect pipe D to the return hose, then connect pipe C to the pressure hose.
Tightening torque: 15 N-m (1.5 kgf-m, 10.8 ft-lb)
6) Install the universal joint.
7) Connect the tie-rod end and knuckle arm, and tighten with castle nut.
Castle nut tightening torque: 27 N-m (2.75 kgf-m, 19.9 ft-lb)
CAUTION: When connecting, do not hit the cap at the bottom of tie-rod end with hammer.