Impreza WRX STI F4-2.5L Turbo (2008)
9) Using a press, remove the pinion & valve assembly from valve housing.
10) Using the ST and a press, remove the bushing and oil seal from the valve housing.
ST 34199AG090 INSTALLER & REMOVER
CAUTION:
^
Do not apply a force to the end surface of valve housing.
^
Do not reuse the oil seal after removal.
11) Using a snap ring pliers, remove the snap ring, valve, oil seal and back-up washer.
CAUTION: Be careful not to scratch the pinion and valve assembly.