Impreza WRX STI F4-2.5L Turbo (2008)
7) Remove the shock absorber mount nut.
8) Remove the shock absorber.
INSTALLATION
NOTE:
^
Be sure to use a new self-locking nut.
^
Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
1) Install in the reverse order of removal.
Tightening torque: Refer to "COMPONENT" of "General Description" for the tightening torque.
2) Check the wheel alignment and adjust it if necessary.
