Impreza WRX STI F4-2.5L Turbo (2008)
8) Install the wheel.
Tightening torque: 100 N-m (10.2 kgf-m, 73.8 ft-lb)
Rear Hub Unit Bearing
Rear Hub Unit Bearing
REMOVAL
1) Disconnect the ground cable from the battery.
2) Lift up the vehicle, and then remove the rear wheels.
3) Lift the crimped section of axle nut.
4) Remove the axle nut using a socket wrench while depressing the brake pedal.
CAUTION: Remove the wheel before loosening the axle nut. Failure to follow this rule may damage the wheel bearings.
5) Remove the disc brake caliper from the rear housing, and suspend it from the vehicle using a string.
6) Remove the rear disc rotor.
7) Remove the four bolts from the rear housing.