Justy L3-1189cc 1.2L (1987)
Brake Shoe: Service and Repair
Fig. 3 Exploded view of drum brake assembly. Justy
1.
Pull up on parking brake lever, remove hub cap and cotter pin, then loosen castle nut and wheel nuts.
2.
Raise and support vehicle and remove rear wheels.
3.
Remove castle nut, conical spring and center piece.
4.
Release parking brake lever, then loosen adjusting nut at rear end of parking brake rod to slacken cable tension.
5.
Remove brake drum, then insert screwdriver through access hole in backing plate and allow strut assembly adjuster lever to pivot on strut, thereby
placing it in initial position.
6.
Using suitable pliers, remove shoe hold down springs, Fig. 3.
7.
Remove shoes, then disconnect parking brake cable from lever.
8.
Reverse procedure to install.