Justy L3-1189cc 1.2L (1987)
Owners of vehicles recently sold from your vehicle inventory within the VIN range listed are to be contacted by the dealer, and arrangements should be
made to make the required correction according to instructions contained in this bulletin.
PARTS INFORMATION
Quantities of the EPR/muffler and replacement exhaust gaskets are only available as a kit through your normal parts supply.
SERVICE PROCEDURE
1)
Verify that the vehicle is included in the VIN range listed and has not been repaired.
2)
Lift the vehicle and remove the existing EPR assembly following the procedures in the applicable Justy Service Manual Section 2-9 and retain all
attachment hardware.
NOTE:
UNDER THIS CAMPAIGN, ONLY ONE EPR/MUFFLER KIT REPLACEMENT IS ALLOWED PER VIN. DUPLICATE CLAIMS FOR THE
REPLACEMENT OF THE EPR/MUFFLER WILL NOT BE PROCESSED.
IF YOU ENCOUNTER A CUSTOMER COMPLAINT INVOLVING A RATTLE IN THE NEW EPR ASSEMBLIES P/N'S 744007870,
744007880, 744007890 AND 744007900 PLEASE REFER TO SUBARU TECHNICAL SERVICE BULLETIN 09-29-91.
3)
Install a new EPR/muffler kit using new exhaust gaskets included in the kit and the attachment hardware from Step 2. See campaign bulletin
section entitled "Parts Information" for parts applicability.
4)
Apply the Campaign Completion Label.
5)
All replaced EPRs must be handled according to the current SOA warranty parts policy.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this bulletin will require a "Campaign Completion Label." This label is to be
affixed to the surface of the radiator core support which will be visible when the vehicle is brought in for periodic servicing by the owner. Apply the
"Campaign Completion Label" only on a clean dry surface.
