Justy L3-1189cc 1.2L (1987)
Carburetor Float: Adjustments
Fig. 6 Float level adjustment
1.
Remove and invert the choke chamber.
2.
If clearance ``H'' indicated in Fig. 6 is .437 inch when float seat contacts float stem, fuel level is correct.
3.
To adjust the fuel level, bend portion ``P'' of float seat.
4.
To adjust the effective needle valve stroke, proceed as follows:
a. Measure clearance ``A'' between top of float with float arm extended and bottom of float with float arm down.
b. If measured distance is not 1.835 inch, adjust by bending float stopper ``Q.''