Justy Hatchback 2WD L3-1.2L SOHC (MPFI) (1992)
/Page-372002.png)
Fig. 32 Exploded View Of Crankshaft, Pistons, & Balance Shaft
11.
Remove balancer chain, chain guide and oil pump sprocket, Fig. 32.
12.
Remove main bearing cap attaching bolts, then the caps and crankshaft.
13.
Carefully remove balancer shaft from crankcase.
14.
Press piston pins from connecting rod small end using suitable tool.
15.
Ensure all components are clean and free from foreign material, and that oil passages are clear. Coat all friction surfaces with oil or suitable
assembly lubricant.
Fig. 33 Assembling Piston To Connecting Rod
16.
Assemble piston to connecting rod so that intake valve recesses on piston and crescent mark on connecting rod are positioned as shown, Fig. 33.
17.
Install rings onto pistons. Ensure R1 (top ring) and R2 (second ring) marks on compression rings face upward.
18.
Install balancer shaft and oil pump sprocket, then temporarily install chain guide. If replacing chain and/or chain guide, always replace them in the
following combinations:
