Justy Hatchback 2WD L3-1.2L SOHC (MPFI) (1992)
3.
Reconnect ECU connector and measure resistance between (F119)7 and ground. Resistance should be below 10 Ohms.
For cylinder distinction sensor:
1.
Disconnect ECU and distributor connectors.
2.
Check resistance between ECU and distributor connectors and ground as follows:
Connector & terminal:
Resistance:
(F119)5-(F119)3
Below 1 Ohm
(F119)6-(F119)4
Below 1 Ohm
(F119)5-Ground
Infinite
(F119)6-Ground
Infinite
3.
Reconnect ECU connector and measure resistance between (F119)7 and ground. Resistance should be below 10 Ohms.