Justy Hatchback 2WD L3-1.2L SOHC (MPFI) (1992)
/Page-782003.png)
ECU/Crank Angle Sensor Harness Testing
CHECK ECU VOLTAGE AND RESISTANCE
1. Connect injector connector (F109) and turn ignition "ON."
2. Measure voltage between ECU connector terminals and ground as follows:
Connector & terminal:
Voltage:
(F119)12-Ground
Above 8V
(F119)25-Ground
Above 8V
(F119)11-Ground
Above 8V
3. Turn ignition "OFF" and disconnect ECU connector.
4. Measure resistance between ECU connector terminals and ground as follows:
Connector & terminal:
Resistance:
(F119)13-Ground
Below 10 Ohms
(F119)26-Ground
Below 10 Ohms
