Justy Hatchback 2WD L3-1.2L SOHC (MPFI) (1992)
Fig. 31
6.
Using Fig. 30 and Fig. 31, confirm hoses are connected and routed correctly.
7.
Connect fuel sending unit electrical connector and install cover.
8.
Insert grommet into floor.
NOTE: If the grommet is installed incorrectly, water leakage may occur.
9.
Connect filler and vent hoses.
10.
Install fuel separator.
11.
Install filler pipe cover, inner trim and seat.
12.
Install parking brake.